Tint can come in handy when it comes to keeping your car from getting too hot in the summer. After all, it can be uncomfortable for owners of dark colored cars to get into their cars on a sunny day only to have to wait several minutes for the inside to cool and the seatbelts to not burn. Tint is also helpful in reducing glare, avoiding fading on the interior dash, and improving the outside look of your vehicle—especially if you’re trying to sell it.
Window tint can help out with other parts of the car, such as the tail lights, which play a role in not only how the car works and is able to keep drivers safe and aware of surroundings, but add to the overall look. This guide aims to let you know the steps for using window tint on tail lights.
Check local laws
Because tinting windows keeps everything inside the car from being seen from the outside, the legal aspects of this practice varies across the country. This is the case because tinting has been used for criminal acts since it makes it hard for police officers to make eye contact with drivers during routine traffic stops. You’ll need to do some research on the laws for tinting in your state before you try to apply it to your tail lights, as using it in a state where it is illegal, even if it isn’t for your windows, can get you into deep trouble.
Among the states that allow this practice is Arizona, as you won’t have any problem getting any window tinting in Mesa. Just be sure that your installer has a good reputation.
Prepare your lights
Your tail lights need to be in the right condition in order for the film to stay on. This is made easier if the lights are clean and nothing is left on to stick and create a space between the film and light. Dust and dirt can also harm the look of your tint by providing a bumpy appearance. You can start with soap and water if that has proven to be effective for your lights, but a specific glass cleaner is always reliable.
It’s also important to make sure that the tint fits properly on the light, which you can assure by measuring the dimensions of the light. Due to the size difference between tail lights and windows, you’ll need to do a little extra cutting of the film. Give yourself an extra two inches so that there’s less of a chance for parts being uncovered. Making proper cuts will also help you save money on having to buy more film.
Install the film
Before you cover your tail lights with window tints, you’ll need to spray the application solution onto the lights and get rid of the film’s adhesive backing. This will assure that everything needed for the film to stick to the light is available and there’s nothing on the light that it can keep it off the surface. Spread out the film so that the surface is flat and the sticky part completely faces the light.
Start by slowly attaching the sticky part at one end of the light so that there aren’t any bumps and spaces. Putting the entire film on the light at once will result in air bubbles. Sticking the film at one corner at the bottom or top and slowly moving it to the opposite end increases your chances of a flat cover. You can then use a razor to cut off any extra film at the edges.
Smooth out the film
In order to ensure a completely smooth cover for your tail lights, you must get your hands on a squeegee, which is the most reliable tool for getting rid of bubbles, creases, dirt, water, and anything left over. Going over more than once further increases your chances of a smoother film, so wait a few minutes before you go over the film a second or third time.
Another tool that comes in handy in this stage is a spray bottle full of hot water. You can spray the water on the glass so that your squeegee has an easier time getting rid of creases and bubbles. Heat guns are also helpful if you want the film to be more pliable, but you’ll need to apply it to the outside so that the film doesn’t melt.
Remember these steps so that window tint film can keep your tail lights in good shape.